Characteristics and parameters of cold heading machine
Source：http://www.4000271258.com Author：冷鐓機 Time：2014/6/2 Click：
Characteristics of cold heading machine
1. The connection between the crankshaft and the body, as well as the impact connecting rod, is made of high wear-resistant alloy copper tiles, which have a large bearing capacity, long service life, and low maintenance costs.
2. The body is made of 500 cast ductile iron with added alloy, which has high tensile strength and good wear resistance.
3. Adopting a two-stage gear transmission system, the transmission efficiency is high and the transmission torque is large.
4. Equipped with pneumatic clutch brake to reduce motor power consumption.
5. The cutting system adopts a guide plate to drive the cutting blade rod, with the guide plate reciprocating and the cutting force transmitted in a straight line. The force is large, stable, and has good dynamic balance.
6. The clamp system can be flipped or translated 180 degrees. Beneficial for arranging the molding process.
7. Equipped with a variable frequency speed regulation device, it can achieve infinite speed regulation within a certain range.
8. Equipped with fault detectors and safety protection devices, the equipment will automatically shut down in case of failure, providing maximum protection for the equipment and molds.
9. Install a thrust device on the feeding box to improve feeding accuracy.
Cold heading machine parameters
Dimensions: 2300X1250X1270
Efficiency: 120-130 pieces/minute
Slide pillow stroke: 85mm
Knife rod stroke: 40mm
Workstation spacing: 60mm
Maximum component: M6,M10X1
Motor power: 5.5kw Motor poles: 6 poles
Belt model: 3302
Outer diameter of large flywheel: 900mm
Number of positions: 3
Maximum cutting: 6.5mm
- 上一篇：Cold heading machine steel bar 2014/8/16
- 下一篇：暫無文章
